wrong sound for b and m rs-3s

bobgfla · Joined: 08 Feb 2008 Posts: 35 Location: umatilla fla

hi i bought and downloaded the b and m pack around a mouth ago , as i am a retired b and m carman all the sounds are right ecept the 2 rs-3s have the 539 sound from 1260 and 1263. is this right????? i went into the file for the engines and it says rs-3 for sound . i have 3 different rs-3s with 3 different sounds mi 1092 with the 251 sounds is my favert and vary happy with the 251 sound, close enought to the 244 .then downloaded the l and hr pack thay have the f m sound and your b and m rs-3s have the 539 switcher sound , witch is vary vary good but only on the switchers but does not sound right in a rs-3 . thanks in advance bobgfla

BLW1946 · Joined: 21 Sep 2007 Posts: 59 Location: Buffalo NY

Bob,

If you really want realistic Alco sounds, I heartily recommend Gaetan's Alco Sound Pack. You can check it out at http://www.valleypass.com/Sales/ASP.htm - it's one of my favorite add-ons.

bobgfla · Joined: 08 Feb 2008 Posts: 35 Location: umatilla fla

yes i was thinking of that ,,,,,but i have tryed to put sounds into engines i have downloaded from train sim and can get the sound file into that engine folder ..but never can i get the sound to work, on several engines . same with cab veaws. unless this sound pack has a selfinstaller for each engine i am scred of it ... i just love alco sounds and run mosty alcos and my all time favertt is the rs-3 ps i have head msts since jan 2006 so i have learned alot but sounds and cab verws i have no luck geting into engines .

Gaetan · Posted: Thu Apr 17, 2008 4:55 am Post subject:

Hello Bob

With the Alco Sound Pack you have individual installer for setup each BLW pack's

This pack it's the best alco sound you can find for MSTS Wink