View previous topic :: View next topic |
Author |
Message |
evich
Joined: 30 Jul 2008 Posts: 3 Location: Michigan
|
Posted: Wed Jul 30, 2008 3:07 am Post subject: Missing Sound for E9 CNR Set |
|
|
Hi veteran train simmers,
I recently installed in my trainset folder the E9 CNR set (engines and passenger cars) available in the club members section, and then established a consist via Conbuilder Lite. For some unknown reason, I get no cab sounds (at least no horn) even though I have also installed the "E9 Cab & Sound" for UP CN & VIA set located on the same CN download page.
I'm using an ABA +passenger set consist. Any suggestions on why I might be missing out on sounds would be appreciated. Thanks!
Rich  |
|
Back to top |
|
 |
Gaetan Site Admin

Joined: 21 Sep 2007 Posts: 1107 Location: Mont-Joli QC
|
Posted: Wed Jul 30, 2008 6:14 am Post subject: |
|
|
Maybe you have problem with the lenght of the folder name, sometime windows don't like when the string is too long
"Common.Snd/BLW_Sound/EMD_Sound/E8_Sound/"
if you have experience for edit sms file try to reduce the name of all subfolder
ex: Common.Snd/BLW/EMD/E8/
but don't forget create the same folder _________________ Gaetan
BLW |
|
Back to top |
|
 |
evich
Joined: 30 Jul 2008 Posts: 3 Location: Michigan
|
Posted: Wed Jul 30, 2008 6:21 pm Post subject: |
|
|
Thanks for responding, Gaetan. The files or folders that you mention are not being installed when I install these three downloads (E9CNR.xip, CNR_Set.zip, and cab.zip. After installation and use of Conbuilder to make my consist, I find that there is in my trainset folder a folder named GB_E9_CNR. Inside this folder is a CabView folder, Sound folder and various separate files - .ace, .s as to be expected.
In the CabView folder is file E9Unit.cvf
In the GB_E9_CNR Sound folder I find the following files:
E9_horn1 114KB Wave Sound 2/14/2003
E9B 38 KB SMS File 1/26/2006
E9cab 50 KB SMS File 1/26/2006
E9eng 38 KB SMS File 1/26/2006
x_E9_horn1 57 KB Wave Sound 2/14/2003
When I use Notepad to examine the various SMS files I find references such as:
Common.Snd/BLW_Sound/EMD_Sound/E8_Sound/Notch3.wav" -1 )
I did a search of my MSTS Trainset folder and found a Common.cab folder, with GB_E9Cab folder inside. It is aliased to the E9Unit.cvf.
I also found in my Trainset folder a Common.Snd folder with a folder named KLW_7seriesEMD within. (This folder contains a Read ME file and 14 different sound files, but nothing else--even though the Read ME document refers to an Alias_SMS Folder that should have two SMS files within. I find that this folder and mentioned SMS files is missing. I also do not find any file names such as BLW_Sound, EMD_Sound, or E8_Sound anywhere in my MSTS folders.
Am I missing something else not contained in the previously mentioned downloads from your site?
Rich  |
|
Back to top |
|
 |
Gaetan Site Admin

Joined: 21 Sep 2007 Posts: 1107 Location: Mont-Joli QC
|
Posted: Wed Jul 30, 2008 10:06 pm Post subject: |
|
|
OK Rick , i add the wrong sms with the CNR , DL the CN (black & Red) and replace the sms of the CNR by the sms of CN
the right sound for the E8/9 club is in the KLW folder but you can use my
F9 L&N promo sound (much better) just need to rename the sms _________________ Gaetan
BLW |
|
Back to top |
|
 |
evich
Joined: 30 Jul 2008 Posts: 3 Location: Michigan
|
Posted: Thu Jul 31, 2008 1:24 am Post subject: |
|
|
I do appreciate the help, Gaetan! Strangely, this is exactly the kind of project that I need in order to gain confidence in my ability to swap out cab and sound files!
Rich  |
|
Back to top |
|
 |
|