GP Sets

bandorr2000 · Joined: 21 Sep 2007 Posts: 139 Location: Cinnaminson, NJ

Purchased and installed all GP sets and noticed when viewing the engines with Conbuilder the following 2 items:

1. BLW GP9B UP 182B - The unit shows both the 182B number on the long hood, but has the number 257 where the cab area would be.

2. BLW GP7 ATSF 2881 - Conbuilder Shape viewer says the shape file GP7_SF_2881.s is not unicode.

No other errors noted.

Gaetan · Posted: Thu Dec 25, 2008 11:20 am Post subject:

Opps! missing that for the UP182B

but ATSF work fine in shape viewer and MSTS and conbuilder report no error here

Gaetan

Gaetan · Posted: Thu Dec 25, 2008 11:39 am Post subject:

OK Glen , found the UP Bunit problem with the rotofan upgrade

Retry DL the upgrade and check now if the Bunit is ok

bandorr2000 · Joined: 21 Sep 2007 Posts: 139 Location: Cinnaminson, NJ

That took care of the UP B unit. Thank you. The problem still exists with the 2881 shape file. I made a consist using just that engine and it does not load. Shape file manager version 2.3xx will not uncompress this shape file, and gives the error message of object error.
I have another utility (I forget which one) that also states this shape file is not unicode. Is it possible this was a glitch in the download?

Glenn

Gaetan · Posted: Thu Dec 25, 2008 12:14 pm Post subject:

I use Polymaster 2.10.31 for compress and uncompress all my files Glenn

The Rotofan upgrade include all the shape files, just need to reDL this files if you thinks is an bad DL but if the install work correctly i don't thinks is the problem

I just build an conist with only 2881 and no problem for run in the game

Gaetan

bandorr2000 · Joined: 21 Sep 2007 Posts: 139 Location: Cinnaminson, NJ

Indeed, it was the roto fan upgrade!! Re-downloaded and installed, everything okay now. Thank you. Your prompt attention to problems is your biggest selling point, and the reason I recommend your products to any who inquire about them. Happy Holidays.