CB&Q Caboose in action

[burgerbern]

Many thanks for this beauty Gaetan, i sent her into the shops for an overhaul and she came out like this, it took them all day so its dark



all is well red lights showing

but whats this



its aquired a lighting upgrade, if Gaetan gives me the green light, lol i can post the new lighting section here for people to copy over

[Gaetan]

No problem Bernard

[burgerbern]

here is the lighting code to give the red and green marker lights, paste the whole lot in from and over

Lights (2

to just above the 4 brackets above


inside (

make sure you make a backup first in case you accidently remove to much, the red lights have been readjusted to be more in the centre of the lens and in MSTS with Bin look good, if you are not using BIN you may just have to increase the light diameters a bit, BIN is not needed to work though



Lights ( 4

Light (
Comment ( Red Light Right )
Type ( 0 )
Conditions (
Headlight ( 0 )
Unit ( 3 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( FFee0010 )
Position ( 1.58 2.96 -4.94 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.20 )
)
)
)
Light (
Comment ( Red Light Left )
Type ( 0 )
Conditions (
Headlight ( 0 )
Unit ( 3 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( FFee0010 )
Position ( -1.58 2.96 -4.94 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.20 )
)
)
)
Light (
Comment ( Green Light Right )
Type ( 0 )
Conditions (
Headlight ( 0 )
Unit ( 3 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ff00ff00 )
Position ( 1.58 2.96 -4.69 )
Transition ( 0 )
Radius ( 0.20 )
)
)
)
Light (
Comment ( Green Light Left )
Type ( 0 )
Conditions (
Headlight ( 0 )
Unit ( 3 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ff00ff00 )
Position ( -1.58 2.96 -4.69 )
Transition ( 0 )
Radius ( 0.20 )

[rfranzosa]

Excellent, Thanks!

Rick