| View previous topic :: View next topic |
| Author |
Message |
mantonio131
Joined: 14 Oct 2010
Posts: 22
Location: Born & raised in Brooklyn, NY now residing in the Midwest
|
 Posted: Tue Nov 30, 2010 1:12 am Post subject: Need a good cam cfg file |
 |
|
Greetings and Happy Holidays to all, My original cam cfg on pan#4 only allows me to watch the train as it is oncoming with all of my operating engines and only 3-5 cars in the consist and then it constantly repeats this shot. I have seen on videos where a full length train is viewed from the lead unit to the last car in the consist without the cam jumping instantly and constantly back to the train oncoming view, just where is this great cam cfg file? Strange thing is, on my PRR route the cam does allow this full train length shot, but upon copying it to my MSTS, well its a no go. I would really enjoy watching my trains at the full length of the consist. Any of you kind folks got any leads please let me know. Many Thanks.
Moe Antonio
_________________
Railroaders For Life! |
|
| Back to top |
|
 |
mt78tt
Joined: 26 May 2010
Posts: 28
Location: Germany, Dresden
|
| Posted: Tue Nov 30, 2010 4:27 am Post subject: |
|
|
Hi Antonio,
you just need the Msts-binpatch 1.805xxxx . This was one of the changings from 1.7xxxx . You can download the binpatch here:
http://mstsbin.uktrainsim.com/eng/eng.html
Michael |
|
| Back to top |
|
|
mantonio131
Joined: 14 Oct 2010
Posts: 22
Location: Born & raised in Brooklyn, NY now residing in the Midwest
|
| Posted: Tue Nov 30, 2010 5:20 pm Post subject: |
|
|
Indeed Michael, I thank you humbly sir. Hopefully this will allow me to enjoy the full length of my trains in the pan#4 shot. A safe and enjoyable holiday to you.
Moe Antonio
_________________
Railroaders For Life! |
|
| Back to top |
|
|
|
