| View previous topic :: View next topic |
| Author |
Message |
gg12332
Joined: 20 Aug 2009
Posts: 7
|
 Posted: Thu Aug 20, 2009 1:02 am Post subject: Missing files in PRR Freight set |
 |
|
Gaetan, I ran my PRR Eastern Region DVD installation through Route-Riter and it came up with the following:
[Engine SHAPE FILE]
The shape file F7B_3469.s specified by the file F7B_3469.ENG
in the folder D:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_F7_PRR\
is missing or does not exist or has a mistake in the name.
The error was found on this line: WagonShape ( F7B_3469.s )
--------------------------------------------------
[SHAPE FILE ERROR]
The shape definition file F7B_3469.sd located in the folder
D:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_F7_PRR\
is pointing to a file named F7B_3469.s that doesn't seem to exist or has a wrong name, in the folder
D:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_F7_PRR\Check that the shape filename is correct.
The error was found on this line: Shape ( F7B_3469.s
This error will appear once for each eng/wag it is used in.
--------------------------------------------------
I would appreciate your help on finding this file.
_________________
Thanks in advance!!!
Sincerely,
Joseph "Joe" Anthony Marchetti |
|
| Back to top |
|
 |
gg12332
Joined: 20 Aug 2009
Posts: 7
|
| Posted: Thu Aug 20, 2009 3:37 am Post subject: Missing files Cont'd |
|
|
Also, the following is missing: d:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_RS1_PRR\Fanim.s is missing
d:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_RS1_PRR\Fanim.s is missing
_________________
Thanks in advance!!!
Sincerely,
Joseph "Joe" Anthony Marchetti |
|
| Back to top |
|
|
Gaetan
Site Admin
Joined: 21 Sep 2007
Posts: 1107
Location: Mont-Joli QC
|
| Posted: Thu Aug 20, 2009 4:27 am Post subject: |
|
|
Hello Joe
i don't understand where come this engine F7B_3469.ENG because is not a part of the PRR freight pack ???
look come from my PC Pack
about your second error, i just reinstall the PRR freight pack and the RS1_Fanim.s file is there
I recommand to you reinstall the PRR Freight pack in a temp folder and check if the RS1_Fanim file is present and in the same time check if you have the F7B_3469.ENG in the temp F7 folder
P.S maybe one of your activities install change something !
_________________
Gaetan
BLW |
|
| Back to top |
|
|
bandorr2000
Joined: 21 Sep 2007
Posts: 139
Location: Cinnaminson, NJ
|
| Posted: Thu Aug 20, 2009 4:25 pm Post subject: |
|
|
| I believe the F7 engine is from BLLW, not BLW. |
|
| Back to top |
|
|
gg12332
Joined: 20 Aug 2009
Posts: 7
|
| Posted: Thu Aug 20, 2009 4:57 pm Post subject: |
|
|
| Gaetan wrote: |
Hello Joe
i don't understand where come this engine F7B_3469.ENG because is not a part of the PRR freight pack ???
look come from my PC Pack
about your second error, i just reinstall the PRR freight pack and the RS1_Fanim.s file is there
I recommand to you reinstall the PRR Freight pack in a temp folder and check if the RS1_Fanim file is present and in the same time check if you have the F7B_3469.ENG in the temp F7 folder
P.S maybe one of your activities install change something ! |
Gaetan,
| gg12332 wrote: |
Also, the following is missing: d:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_RS1_PRR\Fanim.s is missing
d:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_RS1_PRR\Fanim.s is missing |
I reinstalled to a different location I found that the freightanim name is actually RS1_Fanim.s, the sd file is Fanim.sd, the file name referred to by the sd file is BLW_ZT_RS1_Fanim.s. I checked the .eng file and the freight anim file name is correct. I changed everything and all references to RS1_Fanim.s and RS1_Fanim.sd, the reference to the s file in the sd to RS1_Fanim.s .
| gg12332 wrote: |
Gaetan, I ran my PRR Eastern Region DVD installation through Route-Riter and it came up with the following:
[Engine SHAPE FILE]
The shape file F7B_3469.s specified by the file F7B_3469.ENG
in the folder D:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_F7_PRR\
is missing or does not exist or has a mistake in the name.
The error was found on this line: WagonShape ( F7B_3469.s )
--------------------------------------------------
[SHAPE FILE ERROR]
The shape definition file F7B_3469.sd located in the folder
D:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_F7_PRR\
is pointing to a file named F7B_3469.s that doesn't seem to exist or has a wrong name, in the folder
D:\MSTS-PRR\TRAINS\TRAINSET\BLW_ZT_F7_PRR\Check that the shape filename is correct.
The error was found on this line: Shape ( F7B_3469.s
This error will appear once for each eng/wag it is used in.
--------------------------------------------------
I would appreciate your help on finding this file. |
These files are still missing. Can you please send them to me or a correction. Please note that the directory is BLW_ZT_F7_PRR
_________________
Thanks in advance!!!
Sincerely,
Joseph "Joe" Anthony Marchetti |
|
| Back to top |
|
|
GaryG
Guest
|
| Posted: Thu Aug 20, 2009 8:20 pm Post subject: |
|
|
Hello Joe
F7B_3469.ENG is not a loco that is or was part of a BLW set. Perhaps some other installer put it into the BLW directory and that could explain why the other files are missing.
It appears this is a problem BLW can not assist with. The closest BLW loco I can see is F7B_3469b.eng which is a NYC loco, part of a NYC pack.
GaryG |
|
| Back to top |
|
|
gg12332
Joined: 20 Aug 2009
Posts: 7
|
| Posted: Thu Aug 20, 2009 9:56 pm Post subject: |
|
|
| GaryG wrote: |
Hello Joe
F7B_3469.ENG is not a loco that is or was part of a BLW set. Perhaps some other installer put it into the BLW directory and that could explain why the other files are missing.
It appears this is a problem BLW can not assist with. The closest BLW loco I can see is F7B_3469b.eng which is a NYC loco, part of a NYC pack.
GaryG |
Gary, I beg to differ!!!
| Code: |
SIMISA@@@@@@@@@@JINX0D0t______
Wagon ( F7B_3469
Type ( Engine )
WagonShape ( F7B_3469.s )
Size ( 3.1m 4.768m 15.0016m )
comment( 212310lbs US )
Mass ( 96.3t )
WheelRadius ( 20in )
InertiaTensor ( Box (3.1m 4.3m 15.0016m) )
Coupling (
Type ( Automatic )
Spring (
Stiffness ( 1e6N/m 5e6N/m )
Damping ( 1e6N/m 1e6N/m )
Break ( 5.1e7N 5.1e7N )
r0 ( 20cm 30cm )
)
comment( CouplingHasRigidConnection () )
Velocity ( 0.18m/s )
)
Buffers (
Spring (
Stiffness ( 1e6N/m 5e6N/m )
Damping ( 1e6N/m/s 1e6N/m/s )
r0 ( 0m 1e9 )
)
Centre ( 0.5 )
Radius ( 1 )
Angle ( 0.5deg )
)
Adheasion ( 0.18 0.35 2 0 )
DerailRailHeight ( 4cm )
DerailRailForce ( 2.5*144.93t )
DerailBufferForce ( 200kN )
NumWheels ( 1 )
Friction (
102N/m/s 0 -1mph 0 1
5.1N/rad/s 1 -1rad/s 0 1
)
BrakeEquipmentType ( "Triple_valve, Auxilary_reservoir, Emergency_brake_reservoir" )
BrakeSystemType ( "Air_single_pipe" )
MaxBrakeForce ( 79.71kN )
EmergencyBrakeResMaxPressure( 110 )
TripleValveRatio( 2.5 )
MaxReleaseRate( 2.27 )
MaxApplicationRate( 40 )
MaxAuxilaryChargingRate( 35 )
EmergencyResCapacity( 10 )
EmergencyResChargingRate( 30 )
BrakeCylinderPressureForMaxBrakeBrakeForce( 64 )
IntakePoint ( -3.33 0.4 FuelDiesel )
IntakePoint ( 3.33 0.4 FuelDiesel )
Lights ( 5
Light (
comment( Rear light bright )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 3 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffFFFFCA )
Position ( -0.98 3.13 -7.3 )
Transition ( 0 )
Radius ( 0.4 )
Azimuth ( -180 -180 -180 )
)
)
)
Light (
comment( Step Light Left Front )
Type ( 0 )
Conditions (
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80FFFFCA )
Position ( -1.48 1.26 4.9 )
Azimuth ( -90 -90 -90 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)
Light (
comment( Step Light Left Rear )
Type ( 0 )
Conditions (
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80FFFFCA )
Position ( -1.48 1.26 -4.9 )
Azimuth ( -90 -90 -90 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)
Light (
comment( Step Light Right Front )
Type ( 0 )
Conditions (
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80FFFFCA )
Position ( 1.48 1.26 4.9 )
Azimuth ( 90 90 90 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)
Light (
comment( Step Light Right Rear )
Type ( 0 )
Conditions (
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80FFFFCA )
Position ( 1.48 1.26 -4.9 )
Azimuth ( 90 90 90 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)
)
Sound ( "F7B.sms" )
)
Engine ( F7B_3469
Effects
(
DieselSpecialEffects
(
comment
(
the format of these little blocks is as follow:
offset.x offset.y offset.z
normal.x normal.y normal.z
width in metres
defining the offset from the shape pivot point
where steam / smoke should appear, the direction
it should go and the width of the nozzle
)
Exhaust1
(
0 4.7 -0.66
0 1 0
0.7
)
Exhaust2
(
0 4.7 -3.03
0 1 0
0.7
)
)
)
Wagon ( F7B_3469 )
Type ( Diesel )
MaxPower ( 1125kW )
comment( 1500p )
MaxForce ( 175.536kN )
MaxContinuousForce ( 250.847kN )
MaxVelocity ( 118mph )
MaxCurrent ( 1000A )
WheelRadius ( 20in )
comment( sanding system is switched off when faster than given velocity )
Sanding ( 1e14mph )
HeadOut ( 1.73 3.45 7.845 )
NumWheels ( 1 )
MaxTemperature ( 120 )
MaxOilPressure ( 90 )
MaxDieselLevel ( 1200gal )
DieselUsedPerHourAtMaxPower ( 186gal )
DieselUsedPerHourAtIdle ( 7.5gal )
AirBrakesAirCompressorPowerRating( 1.7 )
AirBrakesMainMinResAirPressure( 0 )
AirBrakesMainMaxAirPressure( 130 )
AirBrakesMainResVolume( 8 )
AirBrakesAirCompressorWattage( 19000 )
AirBrakesCompressorRestartPressure( 126 )
AirBrakesAirUsedPerPoundsOfBrakePipePressure( .27 )
AirBrakesHasLowPressureTest( 1 )
AirBrakesIsCompressorElectricOrMechanical( 1 )
EngineBrakesControllerMinPressureReduction( 6 )
TrainBrakesControllerMinPressureReduction( 6 )
EngineBrakesControllerHasProportionalBrake( 1 )
EngineBrakesProportionalBrakeLag( 0.9 )
EngineBrakesControllerMaxApplicationRate( 20 )
TrainBrakesControllerMaxApplicationRate( 10 )
EngineBrakesControllerMaxReleaseRate( 20 )
TrainBrakesControllerMaxReleaseRate( 4 )
EngineBrakesControllerEmergencyApplicationRate( 50 )
TrainBrakesControllerEmergencyApplicationRate( 50 )
EngineBrakesControllerMinSystemPressure( 0 )
TrainBrakesControllerMinSystemPressure( 0 )
EngineBrakesControllerMaxSystemPressure( 90 )
TrainBrakesControllerMaxSystemPressure( 90 )
EngineBrakesControllerEmergencyBrakeTimePenalty( 60 )
TrainBrakesControllerEmergencyBrakeTimePenalty( 60 )
EngineBrakesControllerFullServicePressureDrop( 26 )
TrainBrakesControllerFullServicePressureDrop( 26 )
DynamicBrakesMinUsableSpeed( 5 )
DynamicBrakesMaximumEffectiveSpeed( 25 )
DynamicBrakesMaximumForce( 20000 )
DynamicBrakesResistorCurrentLimit ( 5000 )
DynamicBrakesCutInSpeed( 8 )
DynamicBrakesMaxAirBrakePressure ( 15 )
DynamicBrakesFadingSpeed( 25 )
DynamicBrakesDelayTimeBeforeEngaging ( 10 )
DynamicBrakesMaximumSpeedForFadeOut ( 65 )
DynamicBrakesEffectAtMaximumFadeOut( 0 )
DynamicBrakesHigherSpeedCurveExponent( 1 )
DynamicBrakesLowerSpeedCurveExponent( 1 )
DynamicBrakesNumberOfControllerNotches( 10 )
BrakesEngineBrakeType ( "Air_single_pipe" )
BrakesTrainBrakeType ( "Air_single_pipe" )
BrakesEngineControllers( "Independent, Train, Dynamic" )
EngineBrakesControllerDirectControlExponent( 1 )
DoesHornTriggerBell( 0 )
MaxDieselLevel ( 1200gal )
DieselUsedPerHourAtMaxPower ( 186gal )
DieselUsedPerHourAtIdle ( 7.5gal )
DieselSmokeEffectInitialMagnitude( 3 )
DieselSmokeEffectMaxMagnitude( 5.0 )
DieselSmokeEffectInitialSmokeRate( 3 )
DieselSmokeEffectMaxSmokeRate( 6.0 )
DieselEngineIdleRPM( 275 )
DieselEngineMaxRPM( 800 )
DieselEngineSpeedOfMaxTractiveEffort( 35mph )
DieselEngineMaxRPMChangeRate( 25 )
EmergencyStopMonitor(
MonitoringDeviceMonitorTimeLimit( 0 )
MonitoringDeviceAlarmTimeLimit( 0 )
MonitoringDevicePenaltyTimeLimit( 0 )
MonitoringDeviceCriticalLevel( 0 )
MonitoringDeviceResetLevel( 0 )
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 1 )
MonitoringDeviceAppliesCutsPower( 0 )
MonitoringDeviceAppliesShutsDownEngine( 0 )
)
AWSMonitor(
MonitoringDeviceMonitorTimeLimit( -1 )
MonitoringDeviceAlarmTimeLimit( 5 )
MonitoringDevicePenaltyTimeLimit( 0 )
MonitoringDeviceCriticalLevel( 0 )
MonitoringDeviceResetLevel( 0 )
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 1 )
MonitoringDeviceAppliesCutsPower( 0 )
MonitoringDeviceAppliesShutsDownEngine( 0 )
)
EngineVariables( 1200 )
EngineControllers (
Throttle ( 0 1 0.125 0
NumNotches ( 9
Notch ( 0 0 Dummy )
Notch ( 0.125 0 Dummy )
Notch ( 0.25 0 Dummy )
Notch ( 0.375 0 Dummy )
Notch ( 0.5 0 Dummy )
Notch ( 0.625 0 Dummy )
Notch ( 0.75 0 Dummy )
Notch ( 0.875 0 Dummy )
Notch ( 1 0 Dummy )
)
)
Brake_Engine ( 0 1 0.0250 1
NumNotches ( 1
Notch( 0 1 Dummy )
)
)
Brake_Train ( 0 1 0.0250 0.8
NumNotches ( 6
Notch( 0 0 TrainBrakesControllerReleaseStart )
Notch( 0.2 0 TrainBrakesControllerRunningStart )
Notch( 0.4 0 TrainBrakesControllerSelfLapStart )
Notch( 0.5 1 TrainBrakesControllerApplyStart )
Notch( 0.9 0 TrainBrakesControllerFullServiceStart )
Notch( 1.0 0 TrainBrakesControllerEmergencyStart )
)
)
Brake_Dynamic ( 0 1 0.11 0
NumNotches ( 10
Notch ( 0 0 Dummy )
Notch ( 0.11 0 Dummy )
Notch ( 0.22 0 Dummy )
Notch ( 0.33 0 Dummy )
Notch ( 0.44 0 Dummy )
Notch ( 0.55 0 Dummy )
Notch ( 0.66 0 Dummy )
Notch ( 0.77 0 Dummy )
Notch ( 0.88 0 Dummy )
Notch ( 1 0 Dummy )
)
)
DirControl ( -1 0 1 1 )
BellToggle( 0 1 0 )
AWS ( 0 1 0 )
Sanding ( 0 1 0 )
Horn ( 0 1 0 )
Wipers ( 0 1 0 )
EmergencyStopResetToggle( 0 1 0 )
EmergencyStopToggle( 0 1 0 )
Vigilance ( 0 1 0 )
Headlights ( 0 0.25 1 0 )
BailOffButton( 0 1 0 )
)
Name ( "BLW F7B PC 3469" )
Description (
"Belanger Locomotive Works & ZosaTrains Present....\n\n"+
"The F7B is a diesel-electric locomotive, a popular and versatile performer when it was first introduced "+
"which led to a whole age of cab units.\n\n"+
"Locomotive type: EMD Model F7\n\n"+
"Power source: One GM 567c\n\n"+
"Power: 1,500 hp\n\n"+
"Max. speed: 117 mph (188 km/h)\n\n"+
"Gear ratio: 55:22\n\n"+
"Alternator (rectified output): D14\n\n"+
"Traction motors: Four model D7 DC, series wound, axle-hung\n\n"+
"Max. continuous tractive effort: 18,400 lb (83,63 kg)\n\n"+
"Wheel configuration: Twelve 40-in (15.75 cm), tapered tread in A1A-A1A configuration (two sets of two "+
"driven axles and one idle axle in the middle)\n\n"+
"Height: 14 ft. 11 in. (4.7 m)\n\n"+
"Weight: 159.8 U.S. tons (144.93 metric tons)\n\n"+
"Length: 70 ft. 3 1/8 in. (18 m)\n\n"+
"Width: 10 ft. 7 in. (3.1 m)"
)
EngineOperatingProcedures (
"To move forward\n"+
"1. Press the W key to move the Reverser to Forward.\n"+
"2. Press the ; (SEMICOLON) key to release the train brakes.\n"+
"3. Press the [ (LEFT BRACKET) key to release the locomotive brake.\n"+
"4. Press the D key to move the throttle from Idle to Notch 1.\n"+
"5. Gradually increase power (D key), one notch at a time, until your train reaches the desired speed.\n\n"+
"To slow the train\n"+
"1. Press the A key to move the throttle to a lower setting.\n"+
"2. Use the brakes to further reduce speed if desired.\n\n"+
"To apply the dynamic brakes\n"+
"1. Press the A key to move the throttle to the Idle position.\n"+
"2. Wait for 10 seconds, then press the . (PERIOD) key to advance the Dynamic Brake handle from Off to the Setup position. After allowing a few seconds for braking circuit setup, press the . (PERIOD) key again to set the desired level of dynamic braking (Levels 1 - 8).\n\n"+
"To release the dynamic brakes\n"+
"1. Press the D key to move the throttle towards Idle.\n\n"+
"To apply the train brakes\n"+
"1. Press the ' (APOSTROPHE) key to apply the train brakes.\n\n"+
"To bail off the train brakes on the locomotive\n"+
"1. Press the / (FORWARD SLASH) key.\n\n"+
"To release the train brakes\n"+
"1. Press the ; (SEMICOLON) key to release the train brakes.\n\n"+
"To apply the locomotive brake\n"+
"1. Press the ] (RIGHT BRACKET) key to apply the locomotive brake.\n\n"+
"To release the locomotive brake\n"+
"1. Press the [ (LEFT BRACKET) key to release the locomotive brake.\n\n"+
"To activate emergency braking\n"+
"1. Press the A key to reduce the throttle to Idle.\n"+
"2. Press the BACKSPACE key to activate emergency braking.\n\n"+
"To back up\n"+
"1. Bring your train to a full stop.\n"+
"2. Press the S key to move the Reverser to the Reverse position.\n"+
"3. Release the brakes.\n"+
"4. Slowly advance the throttle lever (D key).\n\n"+
"To couple to a car or locomotive\n"+
"1. Coast into the unit at a very slow speed, about 2 mph.\n"+
"TIP: To use the Coupling view, press the 6 key.\n"+
"2. Press F9 to open the Train Operations window.\n"+
"3. If the icon for the unit you coupled to is red, the handbrake is on. Double-click the car to release the handbrake.\n"+
"4. Close the Train Operations window.\n\n"+
"To uncouple from a car or locomotive\n"+
"1. Press F9 to open the Train Operations window.\n"+
"2. Double-click a unit in the part of the train you want to uncouple from the locomotive, to set the handbrake.\n"+
"3. Double-click the coupler between the units you want to uncouple and the rest of the train.\n"+
"4. Close the Train Operations window."
)
) |
This is a direct copy from the .eng file.
_________________
Thanks in advance!!!
Sincerely,
Joseph "Joe" Anthony Marchetti |
|
| Back to top |
|
|
Gaetan
Site Admin
Joined: 21 Sep 2007
Posts: 1107
Location: Mont-Joli QC
|
| Posted: Fri Aug 21, 2009 5:19 am Post subject: |
|
|
Is what i say Joe ,
Name ( "BLW F7B PC 3469" )
This Bunit is part of PC Pack ???? i don't understand how come in your PRR set folder
Have you check in your temp folder is it there ?
_________________
Gaetan
BLW |
|
| Back to top |
|
|
GaryG
Guest
|
| Posted: Fri Aug 21, 2009 12:18 pm Post subject: |
|
|
Hi Joe
My error, my PC pack hadn't been unpacked/installed yet. I just installed it and F7B_3469 eng, s and sd files all ended up in the BLW_F7_PC directory; ShapeViewer renders it without problems so the ace files also installed correctly.
I assume you do have the PC_pack, perhaps you could try moving the errant eng file to the BLW_F7_PC directory to see if all is ok then.
This is a bit of a strange problem.
GaryG |
|
| Back to top |
|
|
gg12332
Joined: 20 Aug 2009
Posts: 7
|
| Posted: Fri Aug 21, 2009 9:59 pm Post subject: |
|
|
Gaetan/Gary, Since I don't own the PC F7 pack, I think it was installed somehow for a .eng & .sd file patch of some kind. How it installed into that directory beats me. I will delete them, since they are useless to me. Unless you would like me to email them to you, Gary? I honestly thought a component of the PRR packs was missing. Thank you both for your help!
_________________
Thanks in advance!!!
Sincerely,
Joseph "Joe" Anthony Marchetti |
|
| Back to top |
|
|
gg12332
Joined: 20 Aug 2009
Posts: 7
|
| Posted: Fri Aug 21, 2009 10:07 pm Post subject: |
|
|
Can someone post the link for the PC F7 pack, as I can't seem to find it.
_________________
Thanks in advance!!!
Sincerely,
Joseph "Joe" Anthony Marchetti |
|
| Back to top |
|
|
gg12332
Joined: 20 Aug 2009
Posts: 7
|
| Posted: Fri Aug 21, 2009 11:08 pm Post subject: |
|
|
Nevermind I think it is here: http://www.valleypass.com/Sales/PC.htm
_________________
Thanks in advance!!!
Sincerely,
Joseph "Joe" Anthony Marchetti |
|
| Back to top |
|
|
|
