View previous topic :: View next topic |
Author |
Message |
BLW1946
Joined: 21 Sep 2007 Posts: 59 Location: Buffalo NY
|
Posted: Thu Dec 10, 2015 10:12 pm Post subject: sw7 cabview issues in Open Rails |
|
|
While testing out the CRR pack in Open Rails this evening (great work!), I discovered that the right side cab window of the SW7 was missing. I tracked it down to this line in the sw7.cvf:
CabViewFile ( "../../Common.Cab/BLW_Cab/SW/SW_Right.ace " )
Removing the quotes corrected the problem.
There is also an issue in the forward main and left cabviews involving a gap between the locomotive hood and the window frame. I corrected it by changing this line:
Position ( 1.08 3.369 -3.213 )
I increased the height to 3.469 on each of the three occurrences. Now it looks like it does in MSTS. _________________ Tim Baldwin
Buffalo NY
Milepost 5 on the Buffalo Belt Line
CSX - NS - CN - CP |
|
Back to top |
|
|
Gaetan Site Admin
Joined: 21 Sep 2007 Posts: 1104 Location: Mont-Joli QC
|
Posted: Fri Dec 11, 2015 4:45 am Post subject: |
|
|
probably the same problem with CGW and WC pack Tim , have you try ? _________________ Gaetan
BLW |
|
Back to top |
|
|
BLW1946
Joined: 21 Sep 2007 Posts: 59 Location: Buffalo NY
|
Posted: Fri Dec 11, 2015 8:05 am Post subject: |
|
|
It also affects the cabviews in the earlier sw7s and sw1200s in the SW west pack, as well as NW2s and sw1s from the Buffalo pack. (There are no visible gaps in the NW2/SW1 cabs, but the changes I made are a definite improvement there as well.) I think it's safe to assume that any pack containing EMD switchers would be affected. Over the weekend, I'll check out some of the other cabs in my collection. _________________ Tim Baldwin
Buffalo NY
Milepost 5 on the Buffalo Belt Line
CSX - NS - CN - CP |
|
Back to top |
|
|
Gaetan Site Admin
Joined: 21 Sep 2007 Posts: 1104 Location: Mont-Joli QC
|
Posted: Fri Dec 11, 2015 8:16 am Post subject: |
|
|
Already release patchs in Patch section of the forum for the
WC CGW CRR and SW west pack 1 & 2 patch updated ,
i let Rick check for the Buffalo and SW Est pack
Thanks Tim _________________ Gaetan
BLW |
|
Back to top |
|
|
BLW1946
Joined: 21 Sep 2007 Posts: 59 Location: Buffalo NY
|
Posted: Sun Dec 13, 2015 8:30 pm Post subject: |
|
|
Gaetan, I was informed that the Global FOV I was using was longer than the standard to which the cabs were built. I apologize for my error.
I re-checked the information in this thread, and checked the SW cabs at FOV settings of 36, 41, and 45. In each case, there was a gap before changing to the value I posted earlier. _________________ Tim Baldwin
Buffalo NY
Milepost 5 on the Buffalo Belt Line
CSX - NS - CN - CP |
|
Back to top |
|
|
|